Sie suchten nach: LABCONCO

Lieferant: LABCONCO

Beschreibung: These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Artikel-Nr: (LBCP303681150)

Lieferant: LABCONCO

Hersteller Artikel Nummer : 303681150

Beschreibung: Purifier Logic+ Class II, Type B2 biosafety cabinets provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates.

UOM: 1 * 1 ST

Sale

Lieferant: LABCONCO

Beschreibung: Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Lieferant: LABCONCO

Beschreibung: Waste port incl. rubber stopper plug, provides a Ø 4,5" (11,4 cm) pass-through port to attach an external waste bag; requires Ø 6,16" drill hole, waste bags and bands (not included)

Lieferant: LABCONCO

Beschreibung: These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).

Artikel-Nr: (LBCP3505300)

Lieferant: LABCONCO

Hersteller Artikel Nummer : 3505300

Beschreibung: Beakers specifically designed for the Goldfisch Fat Extractor. Thick-walled borosilicate glass with flanged and ground tops to facilitate connection to the condenser.

UOM: 1 * 6 ST

Sale

Lieferant: LABCONCO

Beschreibung: This mobile system with or without heat boost combines the separate vacuum concentrator and cold trap components into one space-saving console and include casters for portability from laboratory to laboratory. A 12 to 13 mm rotor and solvent trap are also included. The interior can accommodate a vacuum pump — the only additional component necessary to begin processing.

Lieferant: LABCONCO

Beschreibung: All RapidVap® Vertex™ Dry Block evaporators require a Block (not included). Blocks of solid aluminum include stainless steel handles to lift the block in and out of the evaporator. A 0,21" (0,5 cm) diameter port in the upper left hand corner of the block is provided for insertion of the temperature probe to monitor upper block temperature.

Artikel-Nr: (LBCP3980422)

Lieferant: LABCONCO

Hersteller Artikel Nummer : 3980422

Beschreibung: Purifier HEPA filtered enclosures protect the user from agents that require biosafety level 1, 2 or 3 containment but no product protection. With ergonomic air foil with aerodynamic clean-sweep airflow openings; upper dilution air supply; zone-perforated rear baffle; side-entry air foils; and upper containment sash foil.

UOM: 1 * 1 ST

Sale

Lieferant: LABCONCO

Beschreibung: Flexible duct connections reduce vibration between the blower and PVC ductwork.

Lieferant: LABCONCO

Beschreibung: FreeZone® bench top freeze dryers are designed for lyophilising light to moderate sample loads. The compact design is ideal for laboratories with limited floor space.

Lieferant: LABCONCO

Beschreibung: Fast-Freeze®-Flaschen für FreeZone®-Gefriertrocknungssysteme sind so konzipiert, dass sie einfacher zu handhaben, schneller zu beladen und bequemer im Labor für die Gefriertrocknung zu verwenden sind.

Lieferant: LABCONCO

Beschreibung: Purifier®, Röhrchengestell aus Aluminium, konisch, 12 Well 15 ml, 16 - 17 mm Temp-zone-Paket

Lieferant: LABCONCO

Beschreibung: Replacement HEPA filter, 99,99 % on particles 0,3 micron in size, 609×457×83,82 mm

Lieferant: LABCONCO

Beschreibung: 9-Pin Monitorkabel, Sauerstoff/Feuchtigkeit, AtmosPure™

Lieferant: LABCONCO

Beschreibung: Rotor for 8×25 ml vials (Ø 28 mm × 70 mm), PTFE coated aluminium