Sie suchten nach: LABCONCO

Artikel-Nr: (531-0960)

Lieferant: LABCONCO

Hersteller Artikel Nummer : 7871500

Beschreibung: Zentrifugalverdampfer, Glass trap, 2550 ml, for use in FreeZone freeze dry units

UOM: 1 * 1 ST

Sale

Artikel-Nr: (LBCP9075030)

Lieferant: LABCONCO

Hersteller Artikel Nummer : 9075030

Beschreibung: WaterPro RO stations feature large capacity filters and membrane to deliver high-quality reverse osmosis (RO) purified water (type III). RO purified water is ideal for laboratory applications such as reagent preparation and glassware rinsing. The units be connected to glassware washers to provide purified rinse water.

UOM: 1 * 1 ST

Sale

Lieferant: LABCONCO

Beschreibung: These cabinets support fume hoods and safely store and vent solvents and other flammable liquids. The contents inside them are also protected during any fire case.

Lieferant: LABCONCO

Beschreibung: SpillStopper™ Arbeitsfläche, Aussparung für Becherspüle rechts hinten, 1219×762×32 mm, 50 kg, Für: Laborhauben, Protector®

Artikel-Nr: (LBCP9000732)

Lieferant: LABCONCO

Hersteller Artikel Nummer : 9000732

Beschreibung: WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun (refer to descriptions for models that include gun) at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.

UOM: 1 * 1 ST

Sale

Lieferant: LABCONCO

Beschreibung: Accessory for Freeze Dryer, Beheizter Einlegeboden mit Sensor, für Hordentrockner, 323×432×25 mm (für den Betrieb bei 230 V, 50/60 Hz)

Lieferant: LABCONCO

Beschreibung: These PuriCare Open Access Transfer Station offer utmost efficiency for cage changing operations. Open access on two sides provides ample workspace for one or two operators to transfer animals from dirty cages to clean ones. This enclosure provides personnel, animal and environmental protection. HEPA-filtered vertical airflow provides Class 100 clean air in the work area to protect the animals from cross-contamination. At the same time, room air is drawn into grilles located on the work surface directly below the sash openings to ensure containment and protect the operator from allergens. All contaminated air inside the enclosure is filtered so that particulate-free air is exhausted back into the room, protecting the environment.

Artikel-Nr: (LBCP110410021)

Lieferant: LABCONCO

Hersteller Artikel Nummer : 110410021

Beschreibung: The Protector® XStream® benchtop laboratory hoods are chemical resistant, fiberglass reinforced, composite liner and baffle. These are designed for general chemical applications.

UOM: 1 * 1 ST

Sale

Lieferant: LABCONCO

Beschreibung: Storage cabinet accessory, Protector®, Interior shelf kit with PVC tray for 762 mm protector acid storage cabinets

Lieferant: LABCONCO

Beschreibung: These portable systems provide user protection by keeping powders and particulates contained during weighing procedures. The built-in blower and HEPA filter are mounted in the upper plenum to save space, and the enclosures have low installation costs and require no outside ducting. Systems also provide quiet operation as low as 45 dBA, depending on face velocity.

Lieferant: LABCONCO

Beschreibung: Glassware washing machines, Corner seal

Artikel-Nr: (LBCP303681150)

Lieferant: LABCONCO

Hersteller Artikel Nummer : 303681150

Beschreibung: Purifier Logic+ Class II, Type B2 biosafety cabinets provides personnel, product and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2 or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos and additional substances that generate hazardous airborne particulates.

UOM: 1 * 1 ST

Sale

Lieferant: LABCONCO

Beschreibung: Storage cabinets support fume hoods and used for storage and venting of small laboratory instruments, mild acids and other reagents.

Lieferant: LABCONCO

Beschreibung: Waste port incl. rubber stopper plug, provides a Ø 4,5" (11,4 cm) pass-through port to attach an external waste bag; requires Ø 6,16" drill hole, waste bags and bands (not included)

Artikel-Nr: (LBCP3924200)

Lieferant: LABCONCO

Hersteller Artikel Nummer : 3924200

Beschreibung: Organic carbon filters for Protector® work stations with built-in blower, 5,4 kg, 457×914×250 mm

UOM: 1 * 1 ST

Sale

Lieferant: LABCONCO

Beschreibung: These glove boxes with stainless steel liner provide inlet and outlet ULPA filtration and a leak-tight physical barrier to protect the operator from exposure to potentially hazardous materials and perform work with contamination-sensitive materials under vacuum or in an inert environment. Available with two or four glove ports (double version).