Sie suchten nach: NICKEL ELECTRO

Artikel-Nr: (NICK8040)

Lieferant: NICKEL ELECTRO

Hersteller Artikel Nummer : 8040

Beschreibung: These laboratory spoons are made of corrosion-resistant 304 stainless steel.

UOM: 1 * 1 ST

Sale

Lieferant: NICKEL ELECTRO

Beschreibung: Edelstahl oder Nickel (99,6%). Vielseitiger Spatel für eine große Palette an Anwendungen.

Lieferant: NICKEL ELECTRO

Beschreibung: Multipurpose spatula made of stainless steel for a wide range of uses. One end is flat and spatula-shaped, the other end is rounded and turned up at 45°. Available in light or medium weight design.

Lieferant: NICKEL ELECTRO

Beschreibung: Ablaufhahn, Für: Alle Bäder

Lieferant: NICKEL ELECTRO

Beschreibung: Tiegel-Deckel, Für Ø: 50 mm, Nickel

Lieferant: NICKEL ELECTRO

Beschreibung: perforiertes Edelstahltablett mit Federclips, für 5×1000 ml Kolben, für Schüttelbäder, Perforierter Träger aus Edelstahl mit Federklemmen, für 5×1000-ml-Kolben

Lieferant: NICKEL ELECTRO

Beschreibung: These stainless steel 304 crucibles with bright finish are much harder and last longer than porcelain types.

Lieferant: NICKEL ELECTRO

Beschreibung: Edelstahl. Schaufeln für die Aufnahme von Pudern, Pasten und Granulaten.

Artikel-Nr: (231-0356)

Lieferant: NICKEL ELECTRO

Hersteller Artikel Nummer : 3051

Beschreibung: Pure nickel (99,6%). For easy, safe handling of crucibles made from a wide variety of materials.

UOM: 1 * 1 ST

Sale

Lieferant: NICKEL ELECTRO

Beschreibung: Mild steel (iron). Laboratory bow tongs with clear passivated bright finish.

Artikel-Nr: (231-0170)

Lieferant: NICKEL ELECTRO

Hersteller Artikel Nummer : 6850

Beschreibung: Edelstahl, rostfrei. Gerade Form.

UOM: 1 * 10 ST

Sale

Artikel-Nr: (132-3851)

Lieferant: NICKEL ELECTRO

Hersteller Artikel Nummer : PS-1

Beschreibung: Safety cabinets fitted with three compartments for the storage of medicines in health care premises.

UOM: 1 * 1 ST

Sale

Lieferant: NICKEL ELECTRO

Beschreibung: Stainless steel casing, stove enamelled finish and cast aluminium plate. Units accept retort rods.

Lieferant: NICKEL ELECTRO

Beschreibung: Digital and analogue linear shaking water baths with a stainless steel tank housed in a durable outer case. The corrosion resistant reciprocating trolley readily accepts perforated clip trays for holding flasks and test tube racks. The trolley is easily removed for cleaning purposes and a stainless steel recessed top accommodates flasks, clip trays etc prior to and after immersion. The 28 litre baths include a drain tap for convenient emptying. Digital shakers have splash proof controls featuring an advanced PID temperature controller with a LED display, allowing observation of set and actual temperature simultaneously to 0,1 °C resolution. They also feature a highly accurate PT 100 sensor with the added advantage that it is immersed in the water for accurate temperature measurement. An over-temperature alarm operates on digital baths at 4 °C above set point which switches of the heaters to protect the users work until a safe working temperature is achieved. Analogue model has an electronic temperature controller and an electronic speed control for shaking. The heater and safety device are concealed beneath the tank allowing for easy cleaning.

Lieferant: NICKEL ELECTRO

Beschreibung: Fixed temperature baths with concentric ringed lids. The steam produced provides an effective source of heat for samples that may otherwise be thermally damaged by a naked flame. Models 1020G and 1026G are gas baths, which do not have their own electrical power source, they are designed to be heated by a hotplate or gas burner.

Lieferant: NICKEL ELECTRO

Beschreibung: The Cyclone mixers create a vortex in the tube, which gives a highly effective mixing action. The Cyclone+ is designed for tube, micro plate, flask and micro tube mixing at slow speeds using accessory platforms which can be quickly interchanged. It is ideal for pre-treating paraffin specimens for FISH assys, hybridization step, pre-warm the probe to room temperature, vortex and spin down.