Sie suchten nach: EDWARDS HIGH VACUUM METTLER

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: ULTRAgrade® 15 and 19 oils result from a new process. Most manufacturers use a solvent refining process, whereas these oils are produced by a unique hydrotreating process. This process eliminates nitrogen, sulphur and oxygen and the aromatic hydrocarbons, leaving a clear base stock essentially free of impurities.

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Mist filters are used to separate and trap oil mist and dischage the odours with the exhaust from oil sealed rotary vacuum pumps.

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Centring rings suitable for connections with NW flanges.

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: The E1M18 and E2M18 pumps are direct drive, sliding vane pumps. The E1M18 is a single-stage pump, and the E2M18 is a two-stage pump. The pump is oil sealed and designed for reliable, long-term operation in both laboratory and industrial environments. The pump is a freestanding unit with the drive provided through a flexible coupling by either a single-phase or three-phase (four-pole) motor.

Artikel-Nr: (EDWAC10514316)

Lieferant: EDWARDS HIGH VACUUM METTLER

Hersteller Artikel Nummer : C10514316

Beschreibung: This flange fittings made from stainless steel 316L are ideal for rugged corrosion resistance in semiconductor processing and offer excellent repeatability in high vacuum applications.

UOM: 1 * 1 ST

Sale

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Reducing pieces made of aluminium.

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Elbows 90°, DN 16 mm, Aluminium

Artikel-Nr: (EDWAH11301019)

Lieferant: EDWARDS HIGH VACUUM METTLER

Hersteller Artikel Nummer : H11301019

Beschreibung: Fomblin® perfluoropolyether oil for use in oil sealed rotary vacuum pumps and are practically a direct replacement for mineral oil in terms of viscosity and vapour pressure. Also it contains Drynert fluid which contains anti-rust and anti-wear additives soluble in Fomblin®. These additives cover metallic surfaces with a protective, corrosion resistant film.

UOM: 1 * 1 kg

Sale

Artikel-Nr: (EDWA11026015)

Lieferant: EDWARDS HIGH VACUUM METTLER

Hersteller Artikel Nummer : 11026015

Beschreibung: Ultragrade® 15 oil

UOM: 1 * 1 L

Sale

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Hinged clamps for NW flanges made of aluminium.

Artikel-Nr: (EDWAD39591500)

Lieferant: EDWARDS HIGH VACUUM METTLER

Hersteller Artikel Nummer : D39591500

Beschreibung: This Active Digital Controller (ADC) is a compact single gauge controller with automatic recognizes compatible Edwards gauges, loads the appropriate look-up table and displays the pressure in commonly used vacuum units.

UOM: 1 * 1 ST

Sale

Artikel-Nr: (EDWAA73601983)

Lieferant: EDWARDS HIGH VACUUM METTLER

Hersteller Artikel Nummer : A73601983

Beschreibung: These nXDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise.

UOM: 1 * 1 ST

Sale

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Inlet Desiccant Trap IDT20K: Use when pumping limited quantities of water vapour at high pumpings speeds to a low vapour pressure.

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Blade kit pump

Artikel-Nr: (181-0362)

Lieferant: EDWARDS HIGH VACUUM METTLER

Hersteller Artikel Nummer : A72401903

Beschreibung: These XDS series pumps are completely oil free, dry scroll and improved on their pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise. Gas ballast allows for pumping of condensable vapours including water, solvents, dilute acids and bases. It also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Comes with integrated inverter drive with auto sensing voltage input delivers optimised pumping performance. The pumps are completely field serviceable.

UOM: 1 * 1 ST

Sale

Lieferant: EDWARDS HIGH VACUUM METTLER

Beschreibung: Reducing cross, stainless steel, 130 mm, DN 40/25, Edelstahl