Acetonitril, LiChrosolv® getestet für UHPLC-MS, Supelco®
Lieferant: Merck
|
Gefahr
|
Synonyms:
Essigsäurenitril
, Ethansäurenitril
, Ethannitril
, Methylcyanid
1.03725.2002EA
973
CHF
1.03725.2002
1.03725.1002
Acetonitril, LiChrosolv® getestet für UHPLC-MS, Supelco®
Acetonitril
Highest purity solvents for UHPLC-MS analysis.
- Suitability tested and specified for UHPLC-MS and UHPLC-UV
- Specified quality in positive and negative ESI and APCI MS for lowest detection limits and confidence in analyses in all important MS modes - ESI / APCI (+) <2 ppb; ESI / APCI (-) <10 ppb)
- Lowest impurity profile: For interference-free baselines
- Lowest levels of trace metal impurities: For minimised metal ion adduct formation (up to <5 ppb)
- Lowest level of polyethylene glycol (PEG) impurities in our entire UHPLC-MS solvent line up to give you confidence in your results (PEG S/N signal-to-noise ratio <50)
Microfiltration through 0,2 µm filter: Prolonged lifetime of filters and mechanical parts in HPLC systems and reduced risk of column clogging.
Packed in borosilicate glass bottles: Minimises contamination with metal ions.
The borosilicate bottle with GL 45 neck finish can be directly connected to instruments.
Formel:
H₃CCN MW: 41,05 g/mol Siedepunkt: 81,6 °C (1013 hPa) Melting Pt: –45,7 °C Dichte: 0,782 g/cm³ (20 °C) Flash-Pt: 2 °C (geschlossener Tiegel) Lager Temperatur: Raumtemperatur |
MDL Number:
MFCD00001878 CAS-Nummer: 75-05-8 EINECS: 200-835-2 UN: 1648 ADR: 3,II REACH: 01-2119471307-38 Merck Index: 13,00071 |
Spezifikation Testergebnisse
Al (Aluminum) | ≤ 5 ppb |
Ca (Calcium) | ≤ 5 ppb |
Evaporation residue | ≤ 0.7 mg/L |
Fe (Iron) | ≤ 5 ppb |
Fluorescence at 254 nm | ≤ 0.3 ppb |
Fluorescence at 365 nm | ≤ 0.3 ppb |
ldentity (IR-spectrum) | PASSES |
K (Potassium) | ≤ 5 ppb |
Mg (Magnesium) | ≤ 5 ppb |
Na (Sodium) | ≤ 25 ppb |
Polyethyleneglycol (PEG) Signal-te-noise ratio | ≤ 50 |
Purity (GC) | ~ 99.9 % |
Suitable for LC/MS; lntensity of background mass signals based on reserpine (APCI/ESI negative) | ≤ 10 ppb |
Suitable for LC/MS; lntensity of background mass signals based on reserpine (APCI/ESI positive) | ≤ 2 ppb |
Titrable acid | ≤ 0.001 meq/g |
Titrable base | ≤ 0.0002 meq/g |
UHPLC gradient (at 210nm) | ≤ 1.0 mAU |
UHPLC gradient (at 254nm) | ≤ 0.2 mAU |
Water (H2O) | ≤ 0.01 % |
Filtered by 0.2um filter |
Learn more
About VWR
Avantor is a vertically integrated, global supplier of discovery-to-delivery solutions for...