Sie suchten nach: Safety Caps und Safety Waste Caps

Safety waste caps consistently trap vapours and liquids in safety cans and containers when storing or disposing hazardous material. The closures keep solvents clean while protecting handlers with leak-proof tight seals. Chemically resistant for even the most corrosive materials, the high-quality  cap construction complies with safety codes and regulations for the work place. The strong carbon filters give maximum vapor protection and closures featuring automatic shut-off or funnels make overflow filling or dumping spills impossible.

Safety waste caps consistently trap vapours and liquids in safety cans and containers when storing or disposing hazardous material. The closures keep solvents clean while protecting handlers with leak-proof tight seals. Chemically resistant for even the most corrosive materials, the high-quality cap construction complies with safety codes and regulations for the work place. The strong carbon filters give maximum vapor protection and closures featuring automatic shut-off or funnels make overflow filling or dumping spills impossible.


496  results were found

Sort Results

Listenansicht Easy View
SearchResultCount:"496"
Beschreibung: Safety Waste Cap "LISA", V3.0, Gewinde: S70/71, PTFE
Artikel-Nr: SCTV450070
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 450070
Lieferant: S.C.A.T.


Beschreibung: Safety Waste Cap "LISA", V3.0, Gewinde: S90, PTFE
Artikel-Nr: SCTV450090
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 450090
Lieferant: S.C.A.T.


Beschreibung: Erweiterung elektronische Füllstandskontrolle, ec, Gewinde: M 30x35, PTFE
Artikel-Nr: SCTV450121
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 450121
Lieferant: S.C.A.T.


Beschreibung: Erweiterung Füllstandskontrolle, ec, Gewinde: M 30x35, PTFE
Artikel-Nr: SCTV450122
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 450122
Lieferant: S.C.A.T.


Beschreibung: Sicherheitstrichter "MARCO" V2.0 mit Deckel und Sieb, Gewinde: S 50, HDPE
Artikel-Nr: SCTV318955
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 318955
Lieferant: S.C.A.T.


Beschreibung: Sicherheitstrichter "MARCO" V2.0 mit Deckel und Sieb, Gewinde: S 51, HDPE
Artikel-Nr: SCTV318993
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 318993
Lieferant: S.C.A.T.


Beschreibung: Safety Waste Cap "LISA", V3.0, Gewinde: S55, PTFE
Artikel-Nr: SCTV450055
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 450055
Lieferant: S.C.A.T.


Beschreibung: Waste Caps, Gewinde: S 60, Anschlussstück: 1× GL 25 (m) Schlauchanschluss, 1× GL15 (w) Belüftungsanschluss, PPS
Artikel-Nr: BOHLR1322-60
UOM: 1 * 1 ST
Hersteller Artikel Nummer : R1322-60
Lieferant: Bohlender


Beschreibung: Safety Waste Cap "LISA", V3.0, Gewinde: GL45, PTFE
Artikel-Nr: SCTV450045
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 450045
Lieferant: S.C.A.T.


Beschreibung: SafetyCap III, Gewinde: GL80, Anschlussstück: 3× PFA-Fitting 3,2 mm OD
Artikel-Nr: 590-0518
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 107032
Lieferant: S.C.A.T.


Beschreibung: SafetyCap II, V2.0, 90° abgewinkelt, Gewinde: GL45, Anschlussstück: 2× PFA-Fitting 3,2 mm OD
Artikel-Nr: SCTV399909
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 399909
Lieferant: S.C.A.T.


Beschreibung: Safety Waste Cap "LISA", V3.0, Gewinde: B53, PTFE
Artikel-Nr: SCTV350053
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 350053
Lieferant: S.C.A.T.


Beschreibung: SafetyCap III, Gewinde: GL38, Anschlussstück: 3× PFA-Fitting 1,6/2,3/3,2 mm OD, 2× PFA Blindstopfen
Artikel-Nr: 554-4688
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 107512
Lieferant: S.C.A.T.


Beschreibung: Sicherheitstrichter "MARCO" V2.0 mit Deckel und Sieb, Gewinde: S 65, HDPE
Artikel-Nr: SCTV318954
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 318954
Lieferant: S.C.A.T.


Beschreibung: SafetyCap II, Gewinde: GL32, Anschlussstück: 2× PFA-Fitting 3,2 mm OD
Artikel-Nr: SCTV107511
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 107511
Lieferant: S.C.A.T.


Beschreibung: SafetyCap IV, Gewinde: 83B, Anschlussstück: 4× PFA-Fitting 3,2 mm OD
Artikel-Nr: 590-0521
UOM: 1 * 1 ST
Hersteller Artikel Nummer : 107035
Lieferant: S.C.A.T.